Planet GS-5220-16S8C User Manual

User’s Manual of GS-5220-16S8C & GS-5220-16S8CR
223
Specif
y the logging operation of this port. The allowed values are:
■ Enabled: Frames received on the port are stored in the System Log.
■ Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate are limited.
 Log
ging
Specif
y the port shut down operation of this port. The allowed values are:
■ Enabled: If a frame is received on the port, the port will be disabled.
■ Disabled: Port shut down is disabled.
The default value is "Disabled".
 Shut
down
Specif
y the port state of this port. The allowed values are:
■ Enabled: To reopen ports by changing the volatile port configuration of the
ACL user module.
■ Disabled: To close ports by changing the volatile port configuration of the
ACL user module.
The default value is "Enabled".
 S
tate
Coun
ts the number of frames that match this ACE.
 Counter
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the Page; any changes made locally will be undone.
: Click to clear the counters.

Planet GS-5220-16S8C Specifications

General

Brand	Planet
Model	GS-5220-16S8C
Category	Switch
Language	English