Command Guide
-148-
4.2.65.98 qos policer
Command:
qos policer <Rate : 100-13200000>
qos Quality of Service
policer Policer configuration
<Rate : 100-13200000> Policer rate (default kbps)
Default:
0
Usage Guide:
To configure Ingress Port Policers Rate of QoS for specific interface
Example:
To configure Ingress Port Policers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos policer 9999
4.2.65.99 qos queue-policer queue
Command:
qos queue-policer queue <Queue : 0~7> <Rate : 100-13200000>
qos Quality of Service
queue-policer Queue policer configuration
queue Specify queue
<Queue : 0~7> Specific queue or range
<Rate : 100-13200000> Policer rate in kbps
Default:
0
Usage Guide:
To configure Ingress Queue Policers Rate of QoS for specific interface
Example:
To configure Ingress Queue (4) Policers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
Switch# configure terminal
To Next Page
Loading...
Need help?
General
