Command Guide
-426-
4.21.104 show vlan
Command:
show vlan [ id <vlan_list> | name <name> | brief ]
show Show running system information
vlan VLAN status
id VLAN status by VLAN id
name VLAN status by VLAN name
brief VLAN summary information
Default:
N/A
Usage Guide:
To display the VLAN information.
Example:
To display the VLAN information.
Switch # show vlan
VLAN Name Interfaces
---- -------------------------------- ----------
1 default Gi 1/1-25 10G 1/1-4
4.21.105 show vlan ip-subnet
Command:
show vlan ip-subnet [ id <subnet_id> ]
show Show running system information
vlan VLAN status
ip-subnet Show VLAN ip-subnet entries
id Show a specific ip-subnet entry
Default:
N/A
Usage Guide:
To display the IP-based VLAN information.
Example:
To display the IP-based VLAN information.
To Next Page
Loading...
Need help?
General
