Planet IGS-10020 Series Command Guide

Command Guide
-291-
Usage Guide:
To configure the NAS-IP-Address
Example:
To configure the NAS-IP-Address (7.7.7.7)
Switch# configure terminal
Switch (config)# radius-server attribute 4 7.7.7.7
4.2.193 radius-server attribute 95
Command:
radius-server attribute 95 <Ipv6 : ipv6_ucast>
radius-server Configure RADIUS
95 NAS-IPv6-Address
Default:
None
Usage Guide:
To configure the NAS-IPv6-Address
Example:
To configure the NAS-IPv6-Address (2001::7788)
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788
4.2.194 radius-server deadtime
Command:
radius-server deadtime <Minutes : 1-1440>
radius-server Configure RADIUS
deadtime Time to stop using a RADIUS server that doesn't respond
<Minutes : 1-1440> Time in minutes
Default:
0

Planet IGS-10020 Series Specifications

General

Brand	Planet
Model	IGS-10020 Series
Category	Network Router
Language	English