Command Guide
-361-
Switch # show interface GigabitEthernet 1/1 switchport
Name: GigabitEthernet 1/1
Administrative mode: access
Access Mode VLAN: 1
Trunk Native Mode VLAN: 1
Administrative Native VLAN tagging: disabled
Allowed VLANs: 1-4095
Hybrid port configuration
-------------------------
Port Type: C-Port
Acceptable Frame Type: All
Ingress filter: Disabled
Egress tagging: All except-native
Hybrid Native Mode VLAN: 1
Hybrid VLANs Enabled: 1-4095
4.21.24 show
interface <port_
type> <port_t
ype_list>
veriphy
Command:
show interfa
ce <port_ty
pe> <port_type_list> v
eriphy
show Show running system information
interface Interface status and configuration
veriphy Run cable diagnostics and show result.
Default:
N/A
Usage Guide:
To display the result of Cable Diagnostics.
Example:
To display the result of Cable Diagnostics for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 veriphy
Starting VeriPHY - Please wait
Interface Pair A Length Pair B, Length
---------------------- ------ ------ ------- -------
GigabitEthernet 1/1 OK 3 OK 3
Pair C Length Pair D Length
To Next Page
Loading...
Need help?
General
