Command Guide
-374-
4.21.41 show ip http server secure status
Command:
show ip http server secure status
show Show running system information
ip Internet Protocol
http Hypertext Transfer Protocol
server HTTP web server
secure Secure
status Status
Default:
N/A
Usage Guide:
To display the DHCP Snooping table.
Example:
To display the DHCP Snooping table.
Switch # show ip http server secure status
Switch secure HTTP web server is disabled
Switch secure HTTP web redirection is disabled
4.21.42 show ip igmp snooping
Command:
show ip igmp snooping [ vlan <vlan_list> ] [ group-database [ interface ( <port_type>
[ <port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
show Show running system information
ip Internet Protocol
igmp Internet Group Management Protocol
snooping Snooping IGMP
vlan Search by VLAN
group-database Multicast group database from IGMP
interface Search by port
sfm-information Including source filter multicast information from IGMP
detail Detail running information/statistics of IGMP snooping
Default:
N/A
To Next Page
Loading...
Need help?
General
