Command Guide
-97-
4.2.65.2 access-list action deny
Command:
access-list action deny
action Access list action
Default:
Deny
Usage Guide:
To configure Deny for the ACL action.
Example:
To configure Deny ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action deny
4.2.65.3 access-list logging
Command:
access-list logging
logging Logging frame information. Note: The logging feature only works when the packet length is less than
1518 (without VLAN tags) and the System Log memory size and logging rate is limited.
Default:
Disable
Usage Guide:
To enable Logging function for the ACL.
Example:
To enable ACL Logging function for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list logging
To Next Page
Loading...
Need help?
General
