Planet IGS-10020 Series Command Guide

Command Guide
-402-
4.21.80 show pvlan isolation
Command:
show pvlan isolation [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
pvlan PVLAN configuration
isolation show isolation configuration
interface Search by port
Default:
N/A
Usage Guide:
To display the port isolation configuration.
Example:
To display the port isolation configuration.
Switch # show pvlan isolation
Port Isolation
-------------------------------- ---------
GigabitEthernet 1/1 Disabled
GigabitEthernet 1/2 Disabled
GigabitEthernet 1/3 Disabled
4.21.81 show qos
Command:
show qos [ { interface [ ( <port_type> [ <port> ] ) ] } | wred | { maps [ dscp-cos ]
[ dscp-ingress-translation ] [ dscp-classify ] [ cos-dscp ] [ dscp-egress-translation ] }
| { qce [ <qce> ] } ]
show Show running system information
qos Quality of Service
interface Interface
maps Global QoS Maps/Tables
cos-dscp Map for cos to dscp
dscp-classify Map for dscp classify enable
dscp-cos Map for dscp to cos
dscp-egress-translation Map for dscp egress translation
dscp-ingress-translation Map for dscp ingress translation

Planet IGS-10020 Series Specifications

General

Brand	Planet
Model	IGS-10020 Series
Category	Network Router
Language	English