Command Guide
-366-
4.21.31 show ip dhcp detailed statistics
Command:
show ip dhcp detailed statistics { server | client | snooping | relay | normal-forward |
combined } [ int
erface ( <port_ty
pe> [ <p
ort_list> ] ) ] show Show running system information
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
detailed DHCP server
statistics Traffic statistics
client DHCP client
combined Show all DHCP related statistics
normal-forward DHCP normal L2 or L3 forward
relay DHCP relay
server DHCP server
snooping DHCP snooping
interface arp inspection entry interface config
Default:
N/A
Usage Guide:
To display the DHCP detailed statistics.
Example:
To display the DHCP detailed statistics (Client) for GigabitEthernet 1/1.
Switch # show ip dhcp detailed statistics client interface GigabitEthernet 1/1
GigabitEthernet 1/1 Statistics:
-------------------------------
Rx Discover: 0
Tx Discover: 0
Rx Offer: 0
Tx Offer: 0
Rx Request: 0
Tx Request: 0
Rx Decline: 0
Tx Decline: 0
Rx ACK: 0
Tx ACK: 0
Rx NAK: 0
To Next Page
Loading...
Need help?
General
