Command Guide
-326-
Example:
To configure the Protocol-based VLAN (below table)
Switch# configure terminal
Switch (config)# vlan protocol llc 0x55 0x66 group 3
4.2.228 voice vlan
Command:
voice vlan
voice Voice appliance attributes
vlan Vlan for voice traffic
Default:
Disabled
Usage Guide:
To enable the Voice VLAN service
Example:
To enable the Voice VLAN service
Switch# configure terminal
Switch (config)# voice vlan
4.2.229 voice vlan aging-time
Command:
voice vlan aging-time <aging_time>
voice Voice appliance attributes
vlan Vlan for voice traffic
aging-time Set secure learning aging time
<AgingTime : 10-10000000> Aging time, 10-10000000 seconds
Default:
86400
To Next Page
Loading...
Need help?
General
