Planet IGS-10020 Series Command Guide

Command Guide
-397-
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.0.44
2
3
4
5
4.21.72 show platform phy
Command:
show platform phy [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY information.
Example:
To display the PHY information for GigabitEthernet 1/1.
Switch # show platform phy interface GigabitEthernet 1/1
Port API Inst WAN/LAN/1G Mode Duplex Speed Link
---- --------- --------- ---- ------ ----- ----
1 Default 1G ANEG - - No

Planet IGS-10020 Series Specifications

General

Brand	Planet
Model	IGS-10020 Series
Category	Network Router
Language	English