User Manual of WDRT-1800AX
-51-
Router
5.1.20 LAN settings
Figure 5-34 LAN settings
IP Address
Router’s LAN IP.
The default is 192.168.1.1. You can change it according to your needs.
Mask
Router’s LAN subnet mask.
Click the button to enable or disable Router DHCP Server function.
Starting IP / Ending IP
Configure the IP address interval that allocated to the terminal. The
address interval must be on
the same network segment as the
management IP address of the Router.
Lease Time
Select the time for using one assigned IP from the dropdown list. After
the lease time, the AP automatically assigns new IP addresses to all
connected computers.
DNS1
Set main DNS for internet wan connection(If not filled, the gateway
address will be used as the DNS address)
DNS2
Set second DNS for internet wan connection(If not filled, the gateway
address will be used as the DNS address)
To Next Page
Loading...
Need help?
General
