User Manual of WDRT-1800AX
-62-
Chapter 6. FAQs
FAQ 1. What can I do if I forgot my wireless password?
The default wireless password is printed on the label of the router. If the password has been altered, please
connect your computer to the router using an Ethernet cable and follow the steps below:
1. Visit http://192.168.1.1
2. Go to Wireless 2.4G/5G Wi-Fi name and password
3. Retrieve or reset your Wi-Fi password
FAQ 2. What can I do if I forgot my login password of the web management
page?
The default password of the web management page is admin (in lowercase). If the default password cannot be
used, try the following: When the device is running, press and hold the reset (WPS / RST) button with a needle
for 5s, release it, and wait for the device to restart.
FAQ 3. I cannot log into the router’s web management page, what can I
do?
This can happen for a variety of reasons. Please try the methods below to log in again.
1. Check physical connection
Plug the cable into the router LAN port and make sure the corresponding LAN LED is on.
Connect to the SSID corresponding to the label on the back of the router
2. Check IP information
Your device must have an IP from the ceres device to access the web management page. Most Ceres devices
have DHCP turned on by default, which will assign an IP address to your device. Some devices do not have
DHCP server function, in this case you need to manually set the IP address to access the management page
To Next Page
Loading...
Need help?
General
