User Manual of WDRT-1800AX
-52-
5.1.21 Static IP allocation (IP & MAC Binding)
IP and MAC Binding is used to bind the IP address of a network device to its MAC address. This will prevent
ARP spoofing and other ARP attacks by denying network access to devices in the binding list with matching IP
addresses but unrecognized MAC addresses.
Steps to follow:
1) Go to Router
Static IP allocation
2) Bind your device according to your need
Note: The bound IP cannot be the IP in use
Figure 5-35 IP & MAC Binding
Device Name Enter a name for the device
MAC Address Enter a MAC address
IP
Enter the specified IP address in the IP pool range, which is
Operation Press the “+” or “-” button to add or delete the rule.
To Next Page
Loading...
