User Manual of WDRT-1800AX
-72-
Windows 7/Windows 10 (WLAN AutoConfig)
WLAN AutoConfig service is built in Windows 7 for detecting and connecting to wireless network. This built-in
wireless network connection tool is similar to wireless zero configuration tool in Windows XP.
Step 1: Right-click on the network icon displayed in the system tray
Figure 6-5
Step 2: Highlight and select the wireless network (SSID) to connect
(1) Select SSID (Take default_2.4G for example)
(2) Click the [Connect] button
Figure 6-6
If you want to be connected to this Wireless Router, check [Connect
automatically].
Step 4: Enter the encryption key of the Wireless Router
(1) Connect to a Network box will appear
To Next Page
Loading...
