2 Planmeca ProOne User’s Manual
The manufacturer, assembler and importer are responsible for the safety, reliability
and performance of the unit only if:
- installation, calibration, modification and repairs are carried out by qualified
authorised personnel
- electrical installations are carried out according to the appropriate requirements
such as IEC 60364
- equipment is used according to the operating instructions.
Planmeca pursues a policy of continual product development. Although every effort is
made to produce up-to-date product documentation this publication should not be
regarded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.
COPYRIGHT PLANMECA
Publication Number 10016256 Revision 15
Release Date 10 July 2018
14 SETTINGS ....................................................................................................................... 72
14.1 User settings ......................................................................................................................... 73
14.2 Program settings ................................................................................................................... 82
15 HELP MESSAGES ............................................................................................................ 99
16 ERROR MESSAGES ....................................................................................................... 102
17 CLEANING AND DISINFECTION .................................................................................... 103
17.1 Patient supports, patient handles and control panel ........................................................... 104
17.2 Other surfaces .................................................................................................................... 106
18 SERVICE ....................................................................................................................... 107
19 DISPOSAL ..................................................................................................................... 108
20 TECHNICAL SPECIFICATIONS ...................................................................................... 109
20.1 Technical data .................................................................................................................... 109
20.2 Original manufacturer ......................................................................................................... 110
To Next Page
Loading...
Need help?
General
