Planmeca ProOne - Optional Cross-sectional Exposure Programs

9 CONTROL PANEL
28 Planmeca ProOne User’s Manual
To select the imaging side for lateral or midsagittal
exposures, touch the right or left side button at the top of
the display. The button of the selected side will be
highlighted. Note that the buttons refer to the patient’s
(not your) right and left side.
Accept the selection and return to the main display by
touching the green check mark button in the bottom right
corner of the display.
9.5 Selecting cross-sectional exposure program (optional)
NOTE
Cross-sectional programs are not included in the basic
program package. Both cross-sectional programs are
optional.
To select a cross-sectional exposure program, touch the
program field on the main display. The main display is the
display that is shown when the X-ray unit is switched on.
The
Select program display appears. Select the required
cross-sectional exposure program by touching the
appropriate field on the display. The selected program will
be highlighted.
NOTE
The patient positioning lights will be automatically
switched on when you select the exposure program.
Patient’s right/left side