Planmeca ProOne - Selecting Sinus Exposure Programs

9 CONTROL PANEL
User’s Manual Planmeca ProOne 25
Accept the selection and return to the main display by
touching the green check mark button in the bottom right
corner of the display.
9.4 Selecting sinus exposure program
To select a sinus exposure program, touch the program
field on the main display. The main display is the display
that is shown when the X-ray unit is switched on.
The
Select program display appears. Select the required
sinus exposure program by touching the appropriate field
on the display. The selected program will be highlighted.
NOTE
The patient positioning lights will be automatically
switched on when you select the exposure program.
There are three sinus exposure programs: PA rotational,
Lateral non-rotational and Midsagittal non-rotational.
NOTE
The sinus program “PA rotational” is included in the basic
program package. Other sinus programs are optional.
NOTE
When the child setting (smallest patient size) is selected,
the image size and patient dose are automatically
reduced.