9 SYSTEM SETUP
22 Planmeca ProScanner User’s & installation manual
Only use the supplied power adapter and
power cord included with the system. Not
doing so may lead to fire, electrical shock, or
electrocution.
Socket-outlet should be installed near the
device for easy access.
Do not place the device where access to
appliance inlet is obstructed.
Do not unplug the power cord or turn the
power switch off during scanning.
1. Connect the power cord to the back side of the
scanner.
2. Connect the other end of the cord to a grounded
power outlet.
To Next Page
Loading...
Need help?
General
