10 MAIN PARTS
User’s & installation manual Planmeca ProScanner 33
System
In the
System
menu you can set the auto sleep
and auto trim mode.
Auto sleep
In the auto sleep display you can set the period
of idle time after which the device goes into
sleep mode.
Select the setting by touching the appropriate
button.
Auto trim
The scanner scans an area slightly larger than
the imaging plate. With auto trim enabled, the
excess white area around the image will be
automatically removed.
Language
Click the
Language
menu to select the language
for the user interface.
Network
Network related settings.
To Next Page
Loading...
Need help?
General
