3.59
ENGINE
3
800 EFI EXHAUST SYSTEM (DELUXE)
Dual Exhaust Layout
The dual exhaust canisters on select Polaris 800 EFIs are silver
ceramic coated. To maintain a beautiful finish and prevent
corrosion, periodic maintenance is required. DO NOT use
caustic chemicals to clean, as they may damage the finish.
1. Wash any accumulated mud or debris from the canisters
with a soft brush and soapy water.
2. Use a cleaner, such as HPC HiPerWash
to clean away any
remaining grime, salts or oils.
3. If the canisters are stained from oils or other fluids, use fine
steel wool with HPC Liquid Buff
Cleaner and Polish to
remove the stain.
4. After removing the stains, polish using Liquid Buff
and
a soft cloth.
5. Repeat this procedure as often as desired to maintain the
canister's finish.
NOTE: Silencer removal requires replacement of the
silencer grommets, item H, as they become
damaged during removal.
A. Mounting Hardware
B. Clean Out Plug
C. Exhaust Seal/Clamp
D. Dual Exhaust Pipe
E. Exhaust Shields
F. Gasket
G. Exhaust Silencers
H. Silencer Grommets
A.
B
C
E
F
G
E
D
G
H
To Next Page
Loading...
