EasyManuals Logo

Polaris 2007 SPORTSMAN X2 800 User Manual

Polaris 2007 SPORTSMAN X2 800
393 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #270 background imageLoading...
Page #270 background image
8.18
SPORTSMAN TRANSMISSION
Troubleshooting
Check the following items when shifting difficulty is
encountered.
• Idle speed adjustment
• PVT alignment
• Transmission oil type/quality
• Transmission torque stop adjustment (where applicable)
• Engine torque stop adjustment (where applicable)
• Drive belt deflection
• Loose fasteners on rod ends
• Loose fasteners on selector box
• Worn rod ends, clevis pins, or pivot arm bushings
• Linkage rod adjustment and rod end positioning
• Shift selector rail travel
• *Worn, broken or damaged internal transmission
components
NOTE: To determine if shifting difficulty or problem
is caused by an internal transmission problem,
isolate the transmission by disconnecting linkage
rod from transmission bellcrank. Manually select
each gear range at the transmission bellcrank, and
test ride vehicle. If it functions properly, the problem
is outside the transmission. If transmission problem
remains, disassemble transmission and inspect all
gear dogs for wear (rounding), damage. Inspect all
bearings, circlips, thrust washers and shafts for
wear.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 2007 SPORTSMAN X2 800 and is the answer not in the manual?

Polaris 2007 SPORTSMAN X2 800 Specifications

General IconGeneral
BrandPolaris
Model2007 SPORTSMAN X2 800
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals