2.21
MAINTENANCE
2
NOTE: Apply a small amount of general purpose
grease to the sealing edges of the filter before
reinstalling.
NOTE: The air filter should rest on the filter support.
Proper placement of the air filter is important to
prevent rattles and air leaks.
11. Install air box cover and secure with clips.
Air Box Sediment Tube
Periodically check the air box drain tube located toward the rear
of the machine. Drain whenever deposits are visible in the clear
tube.
1. Remove drain plug (A) from end of sediment tube (B).
2. Drain tube.
3. Reinstall drain plug.
NOTE: The sediment tube will require more frequent
service if the vehicle is operated in wet conditions or
at high throttle openings for extended periods.
Engine Breather
Four-cycle ATV engines are equipped with a engine breather
filter. The in-line filter is similar in appearance to a fuel filter.
The breather lines are located on top of the cylinder head cover,
below the gas tank. Be sure breather line is routed properly and
secured in place. Make sure the lines are not kinked or pinched.
In-line breather filters can be installed with the arrow pointing
in either direction.
A
Main Filter
Filter Support
Air Box
Front of ATV
Proper Filter
Placement
A
B
Breather
Hose
To Cylinder
Head Cover
To Next Page
Loading...
Need help?
General
