Poly Studio X50 Administrator's Guide

2. Select Start Video Capture.
The system alerts the conference room participants and asks for approval to begin the video
capture. Once the room participants approve by select Yes, the video capture begins.
In the system web interface, the system reports that the video capture is in progress.
Once complete, the system web interface reports that the video capture is complete and sent to
Poly Lens.
3. In your Poly Lens portal, go to the Diagnostics page to view the video recording.
The video recording displays as a tvpr_ file, and is available for download.
For more information, see Poly Lens Help.
Wake the System Remotely
You can wake the system from the system web interface.
1. In the system web interface, go to Diagnostics > Remote Monitoring.
2. Go to System Wake and select Wake the System.
End a Session
Use this tool to close a sharing session. All live content is stopped, and all blackboards and
whiteboards are deleted.
■
Select . A message appears informing you that the session will end in 15 seconds.
Wake the System Remotely
105

Poly Studio X50 Specifications

General

Bluetooth	Bluetooth 5.0
Video Output	HDMI
Zoom	5x digital zoom
Aperture	f/2.0
Power	100-240V AC, 50/60 Hz
Video Resolution	4K Ultra HD (3840 x 2160)
Camera Field of View	120 degrees
Audio Pickup Range	Up to 25 feet
Connectivity	Wi-Fi, Bluetooth
Ports	1x HDMI output 1x HDMI input
Supported Platforms	Zoom, Microsoft Teams
Video Standards	H.264, H.265
Audio Standards	G.711, G.722, G.722.1, G.729A
Wireless Protocol	802.11a/b/g/n/ac
Audio Output	3.5 mm line out
Ethernet	Gigabit Ethernet
Display	External display required
Operating System	Android-based
Weight	2.2 kg