Poly Studio X50 Administrator's Guide

Setting Description
DNS Server Specifies the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address
automatically.
DNS Alternate Server
Specifies the alternate DNS server address for the Wi-Fi
network.
This setting is read-only if your system gets its IP address
automatically.
5. Select Connect.
If you’re using Microsoft Team Rooms as a provider, reboot the system.
Configure Wi-Fi Settings from System Device Settings
Set up the Wi-Fi network from Device Settings on your video system or device.
1. Select More > Device Settings.
2. Select Admin Settings, then enter the admin credentials for the system.
3. Select the check box for Enable Wi-Fi, then select Setup a Wi-Fi Network.
4. Follow the onscreen wizard to continue setting up your Wi-Fi network.
54
Chapter 6Configuring Network Settings

Poly Studio X50 Specifications

General

Bluetooth	Bluetooth 5.0
Video Output	HDMI
Zoom	5x digital zoom
Aperture	f/2.0
Power	100-240V AC, 50/60 Hz
Video Resolution	4K Ultra HD (3840 x 2160)
Camera Field of View	120 degrees
Audio Pickup Range	Up to 25 feet
Connectivity	Wi-Fi, Bluetooth
Ports	1x HDMI output 1x HDMI input
Supported Platforms	Zoom, Microsoft Teams
Video Standards	H.264, H.265
Audio Standards	G.711, G.722, G.722.1, G.729A
Wireless Protocol	802.11a/b/g/n/ac
Audio Output	3.5 mm line out
Ethernet	Gigabit Ethernet
Display	External display required
Operating System	Android-based
Weight	2.2 kg