User Guide for the Polycom SoundStation IP 7000 Phone
3 - 10
Setting Up a Conference Using the Conference Key or Soft Key
To set up a conference using the Conference key or soft key:
1. Call the first person. See Placing Calls on page 3-2.
2. Press or the Confrnc soft key to create a new call. The active call is
placed on hold.
The Enter number screen displays.
3. Place a call to the second person. See Placing Calls on page 3-2.
4. When the second person answers, press or the Confrnc soft key
again to join all people in the conference.
The Active:Conference screen displays.
Note
If configured for single key-press conferences, the conference participant hears the
dial tone and ringback when the conference host places the call to the new person.
Note
If configured for single key-press conferences, you do not have to press the
Conference key or the Confrnc soft key again.