User Guide for the Polycom SoundStation IP 7000 Phone
4 - 2
If you connect your computer calling application or mobile phone to your
conference phone when your conference phone is idle, the computer or mobile
audio automatically becomes the active call, and you immediately hear any
audio associated with the mobile phone or computer calling application.
The following figure shows the conference phone screen if the conference
phone is idle and you connect your computer calling application or mobile
phone to it. You can place the computer or mobile audio on hold (and then
initiate a new call or conference call), or accept a call from another phone while
you listen to computer or mobile audio.
l
For information on how to connect your conference phone (in a single or
two-phone setup) to computer calling applications and mobile phones, see
Connecting Optional Auxiliary Audio Components on page 1-9.
Listening to Computer or Mobile Audio
You can connect the computer or mobile audio source while your conference
phone is in an idle state, or when you have an active call.
To listen to computer or mobile audio when your conference phone is idle:
>>
When your conference phone is idle, connect the mobile phone or
computer calling application to your conference phone. (See Connecting
Optional Auxiliary Audio Components on page 1-9.)
Note
Audio from computer calling applications or mobile phones does not display in your
conference phone Call Lists.
Note
You can use your conference phone that is connected to a computer calling
application or a mobile phone to handle video calls and conferences. See Handling
Computer or Mobile Audio When Your Phone is Connected to a Polycom HDX
System on page 4-19.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
