Polycom SoundStation IP 7000 User Manual

User Guide for the Polycom SoundStation IP 7000 Phone
3 - 14
The following figure shows James Smith on hold. The “on hold” icon displays
next to his name, and the Resume soft key appears.
The held participant cannot hear any participants and no participant can hear
the held participant.
To return the participant to the conference, scroll to the participant, and then
press the Resume soft key.
If the held participant presses the Hold soft key on their phone, the participant
will still be on hold even if you press the Resume soft key.
Removing Conference Call Participants
To remove a conference call participant:
>> From the Manage Conference screen, scroll to the participant you want to
remove, and then press .
The participant is removed from the conference, the conference call ends, and
the other participant becomes the active call.
Obtaining Information About Conference Call Participants
You can display information about a conference call participant, such as their
name and number, or if they are on hold.
Note
If you press the End Call soft key instead, you end the conference call. The other
participants remain connected.

Polycom SoundStation IP 7000 Specifications

General

Frequency range	160 - 22000 Hz
Telephone dynamic range	85 dB
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	1080 g
Dimensions (WxDxH)	394 x 372 x 73 mm