Edition: A03 September 6, 2018
21
starting time is set to 8:00, then the first shift A start time is 8:00, shift B start time is 12:00, shift C
start time is 16:00, and so on.)
Add：If you need to add another shift, user can input the 【Shift name】 and the 【Time】,
click 【Add】, the new shift will be added to the list on the left side.
Shift content list: Show the current team all content; Maximum user can add 48 shifts.
Delete: If need to delete any shift, select that one in the list, click 【Delete】
Delete all：If you need to delete all existing shifts, click【Delete All】
Modify Shift Content: select the shift from the list on the left, then edit its content on the right
side, 【Add】will change to【Modify】,click【Modify】to save.
Shift name: Maximum 30 characters, can be Chinese, English letters, numbers or symbols (no
special symbols).
Save shift: Click button to save.
Edit: Selected the shift from the 【shift list】, click “edit” popup the editing interface, click
“save” to save the changes. The default shift cannot be edited.
Select All: All shifts in the list was chosen; Click the switch again change to all don't choose,
all not to choose.
Delete: Select the newly shifts can be deleted. The default shift cannot be deleted
Closing Shift Management: Click on close, out of management interface and save existing
shifts.
Shift Source Name: You must enter at least 1 character, however no more than 30 characters
can be entered. You cannot input symbols (" \ / : *? "< > |")
5) Local image
Image list: Display imported image, maximum is 100 pieces.
Image Preview: Select the image from the list. It will display in preview box.
Name: You must enter at least 1 character, however no more than 30 characters can be entered.
You cannot input symbols (" \ / : *? "< > |").
6) Base image source
【Type】:
Shape: Four base images: Straight line. Select one of the base images, it will be displayed in
real-time in the left preview box.
To Next Page
Loading...
