Edition: A03 September 6, 2018
23
Logopack: Add logopack plug-in first, then the logopack source will have images to select.
[Edit] Choose your image on the left for which is to be added from the logo pack plug-in, the
right is the images in the logopack.
[Source name] Maximum of 30 characters. You can input Chinese, English, symbols and
numbers. The name cannot be empty or use the same name as the built source.
Refer to add local image source for guidance on how to add and save new logo pack source in
an image object.
Note: For logopack messages, you need to register the logo pack plug-in first then you will be
Able to start printing.
10) CSV source
【New Message】>【Source list】>【Add】>【CSV】
【Edit】
Preview: The content in the preview box only represents CSV source and it can’t be printed.
Default preview content is CSV text. You can input any characters except newline.
【Other】
Connect object: Connect USB, the printer will recognize the CSV files in USB automatically.
Click “down” to switch through choices. CSV folder is in the default USB: Inkjet > CSV.
Field: Choose the columns in CSV you want to print. Default is Field01, click “down” to switch
columns.
Begin: The data to start with, click the icon on the right to pop up the “field” interface, and
switch the data for the beginning.
End: The data selected will be at the end of the database, next message will print from the
beginning. Click the icon on the right to pop up the “field” interface and switch the data to end. End
data can’t be smaller than the begin data.
To Next Page
Loading...
