5. Reinstall the LPCA/Battery module cover and secure using the one #2 Phillips screw
fastener.
6. Reinstall the Input Drive belt and adjust tension, see "Drive Belt Replacement (single
stage drive)" on page103.
7. Reinstall the left and right Drive Housing covers, see "Drive Housing Covers Replace-
ment" on page88.
8. Verify machine operation and return to service, see "Operation Verification" on page16.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 125
6 Replacement Procedures
Generator/Brake Assembly Replacement
To Next Page
Loading...
