Fixed Arms Replacement
About
This procedure provides instruction to remove and install the Fixed Arms.
Specifications
System Component Specification
Fixed Arm Mounting Bar Nylock Set Screw 300 in-lbs (34 Nm)
Handlebar Mount Clamp Screw 144 in-lbs (16.3 Nm)
Procedure
Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Fixed Arms.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 178
6 Replacement Procedures
Fixed Arms Replacement
To Next Page
Loading...
Need help?
General
