Stairarm Replacement
About
This procedure provides instruction to remove and install the Moving and Fixed Arm model
Stairarms.
Specifications
Fastener Specification
Linkarm - Stairarm bolt 300 +/- 90 in-lbs (34 +/- 10 Nm)
Crank Retention Plate Screw 30 +/- 9 in-lbs (3.4 +/- 1 Nm)
Pedal Screws 25 in-lbs (2.8 Nm)
Wheel Nylock bolt 100 in-lbs (11.3 Nm)
Procedure
Review entire procedure before starting.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 197
6 Replacement Procedures
Stairarm Replacement
To Next Page
Loading...
