1. Remove the Drive Access panel, see "Drive Access Panel Replacement" on page83.
2. Remove the left and right Drive Disk covers, see "Drive Disk Covers Replacement" on
page84.
3. Remove the left and right Stairarms off the Input Drive Crank, see "Stairarm Input
Crank Removal" on page199.
4.
Remove the Transition cover from the frame weldment. Pull the bottom edges
slightly apart and lift upward to remove.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 89
6 Replacement Procedures
Covers and Panels Replacement