Figure 43: Input / output AUTOMATIC winch (B.50)* || Connection CAN 0 (B.60)
Pos. Input / output AUTOMATIC winch (B.50)* Pos. Connection CAN 0 (B.60)
1 Winch pump hydraulic pressure TTC94 Master
2 Winch traction force TTC48X-1 Slave
3 Actual cable length TTC48X-2 Slave
4 Winch operating hours TTC48X-3 Slave
5 Winch traction force in %
TTC30 Heating control
6 Mini-joystick functions Vision Display (indicator)
7 Winch status (Manual / AUTO / A-ECO) TTC60W Winch - only displayed when winch
mounted
8 Recommended winding direction and num-
ber of rotations
9 Winch locking device
10 Angle encoder - cable rocker
11 Winch traction force potentiometer
12 Winch drum brake
13 Rotating winch arm brake
14 Mooring valve (mA)
15 FW (mA) = Winch pump forward
RW (mA) = Winch pump backward
16 Angle encoder - winch arm
17 S3 Turning winch arm
18 Vehicle speed
* If no AUTOMATIC winch is installed then this
page will not be displayed.
Operating and Maintenance Manual
Snow groomer BISON
90 (255)
6 - Display
BISON 908930245 - 30367
To Next Page
Loading...