Profitec DRIVE - Proper Use; Machine Description; Machine Parts; Technical Data

Translation of the original German user manual
37
ENGLISH
i
Important
To protect your machine from limescale damage, water with a hardness of up to max 4° dH
should be used.
A calcied machine should only be descaled by a qualied technician in our authorized
dealer as it may require partial disassembly of the boiler and tubing to prevent clogging
of the entire system by limescale residues. Delaying descaling can result in signicant
damage to the machine.
2.2 Proper use
The DRIVE is designed to be used for coffee preparation, dispensing hot water, and steaming. The
machine is not intended for commercial use.
Any use for other purposes than for the above-mentioned will void the warranty. The manufacturer do not
assume any liability or responsibility for damages resulting from improper use.
i
This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, ofces and other working environments
• workshops
• by clients in hotels, motels and other residential type environments
• bed and breakfast type environments
3. MACHINE DESCRIPTION
3.1 Machine parts
DRIVE
Caution!
Risk of injury: The following parts are hot or may become hot:
• area around the valves
• steam and hot water wands
• brew group
• portalter
• body (upper part and side frames)
3.2 Technical data
1. Cup warming tray & water tank
underneath
2. Steam joystick valve
3. Steam wand
4. Display
5. On/off switch (LED)
6. Boiler pressure gauge
7. Drip grid
8. Drip tray
9. Flow prol valve
10. Brewing pressure gauge
11. Hot water joystick valve
12. Hot water wand
13. Brew group
14. Portalter
15. Brew lever
16. Pump pressure gauge
1
2
3
4
5
6
7
8
16
15
14
13
10
9
12
11