PROLiNK® PRC3801 Wireless AC1200 MU-MIMO Dual-Band Gigabit Router
• Tx Restrict (Mbps): To control Download bandwidth to client. By default the value is 0 for no
restriction.
• Rx Restrict (Mbps): To control Upload bandwidth from client. By default the value is 0 for no
restriction.
WPS
To open the WPS setting go to Setting → Wireless 2.4GHz → WPS and WPS setting a window will
appeared. There are three method available to configure the WPS either through Self-PIN number, Push
Button Configuration or Client PIN Number.
• Self-PIN Number: Client can connect with AP by using the given pin from PRC3801. You will
need to enter the Self-PIN Number into client WPS PIN.
• Push Button Configuration: Connect with AP via WPS Push Button. To connect press the
“START PBC” and within 2 minutes client need to enable WPS Push Button function to make
the connection between AP and Client.
• Client PIN Number: Connect with AP using WPS PIN from client. To connect enter the
provided WPS PIN from client into Client PIN Number box and click “START PIN”.
31
To Next Page
Loading...
