PROLiNK PRC3801 - Page 53

PROLiNK® PRC3801 Wireless AC1200 MU-MIMO Dual-Band Gigabit Router
• MinRtrAdvInterval: Enter the minimum time allowed between sending unsolicited multicast
router advertisements from the interface in seconds. By default the value is 198.
• MinDelayBetwennRAs: Enter the minimum time allowed between sending multicast router
advertisements from the interface in seconds By default the value is 3
• AdvManagedFlag: To enables and disable the additional stateful administered auto-
configuration protocol.
• AdvOtherConfigFlag: To enable and disable the auto-configuration of additional, non address
information.
• AdvLinkMTU: Enter value of Advertises the given link MTU in the RA if specified. 0 value
disables MTU advertisements.
• AdvReachable Time: Enter value of Advertises assumed reach-ability time in milliseconds of
neighbors in the RA if specified. 0 value disables reach-ability advertisements.
• AdvRetransTime: Enter value of Advertises wait time in milliseconds between Neighbor
Solicitation messages in the RA if specified. 0 value is disables re-transmit advertisements
• AdvCurHopLimit: Enter value of Advertises the default Hop Count value for outgoing unicast
packets in the RA. 0 value is disables hopcount advertisements. By default value is set to 64.
• AdvDefaultLifetime: Enter value of Advertises the lifetime of the default router in seconds. 0
value is indicates that the node is no default router. By default it is set to 1800.
• AdvDefaultPreference: Select the advertises default router preference. By default it is set to
medium.
• AdvSourceLLAddress: To include the link-layer address of the outgoing interface in the RA.
• UnicastOnly: To enable the indication that the underlying link is not broadcast capable,
prevents unsolicited advertisements from being sent.
48