EasyManua.ls Logo

ProMinent Beta BT4a - Safety Guidelines; Sound Intensity Level

ProMinent Beta BT4a
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProMinent
®
Page 5
Safety
2.2 Safety Guidelines
WARNING
In emergencies the pump should be switched off immediately! Disconnect the power
cable from the power supply!
Do not dispatch pumps which are designed for use with radioactive chemicals!
When using pumps with flammable chemicals, observe the relevant regulations
concerning the transport and storage of flammable fluids (Ex, Vo, Vb F)!
When installing outside Germany, always observe relevant national regulations!
Combining ProMinent
®
metering pumps with parts not approved and tested by ProMinent
is not permissible. It can cause injury or damage to persons or materials for which we
cannot accept liability!
CAUTION
Pumps must be accessible at all times for both operating and servicing. Access must
not be obstructed in any way!
The pumps and peripherals must be serviced and repaired by qualified and authorised
persons only!
Always de-pressurise the liquid end prior to working on a pump!
Empty and rinse the liquid end before working on a pump which has been used with
hazardous or unknown chemicals!
Always read chemical safety data!
Always wear protective clothing when handling hazardous or unknown chemicals!
2.3 Sound intensity level
The sound intensity level is < 70 dB (A) at maximum stroke, maximum stroke rate, maximum
back pressure (water) in accordance with
DIN EN 12639 (Metering Pump Noise Measurement)
BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr5

Table of Contents

Related product manuals