ProMinent S1Cb User Manual

CAUTION!
When changing over from
‘Manual’ operating mode to
‘Contact’ operating mode, the pump maintains the stroke
rate.
The stroke rate can also be set in ‘Contact’ operating mode.
It should normally be set to the maximum stroke rate.
Continuous
display
Memory
Off
On
Main menu
Mode
Settings
Service
Information
Language
Settings
Contact
Auxiliary freq.
Calibrate
Dosing
Relay
Contact
Memory
Factor
End
1.00
Factor
Contact
Memory
Factor
End
1.00 0 0 1 . 0 0
The number of strokes per pulse depends on the factor which you input.
By use of the factor you can multiply incoming pulses by a factor between
1.01 and 100.00 or reduce them by a factor of 0.01 to 1.00.
Number of strokes executed = factor x number of
incoming pulses
Set-up
49

ProMinent S1Cb Specifications

General

Brand	ProMinent
Model	S1Cb
Category	Water Pump
Language	English