In the stroke adjustment dial has been turned, the padlock flashes, the
pump stops and a fault alert and key appear. If you enter the code, the
pump continues metering and the fault alert clears.
8.8
Information about the pump (INFORMATION menu)
Continuous
display
Software version
DATA: 00.03.06.03
HMI: 01.00.00.07
CTRL: 00.03.05.05
FC: 00.01.08.03
PFC: 00.00.03.00
Main menu
Mode
Settings
Service
Information
Language
Information
Identcode
Serial number
Versions
End
Versions
Software version
Hardware version
End
ESC
In the "Info" sub-menu you can read off the following identification num‐
bers:
n Identity code
n Serial number
n Software versions
n Hardware versions
8.9
Set language (LANGUAGE menu)
Language
Main menu
Settings
Service
Information
Language
End
German
English
French
Spanish
Continuous
display
In the
‘LANGUAGE’
menu, you can select the desired operating lan‐
guage.
Changing the stroke length variable
Set-up
63
To Next Page
Loading...
