8.6.8
Settings in the "System" menu" (SYSTEM menu)
Analog output
Unit
End
Main menu
Mode
Settings
Service
Information
Language
Settings
Calibrate
Dosing
Diaphragm break
System
End
Unit
Liter
Gallon (U.S.)
Continuous
display
In the
‘System’
menu you can select whether the pump uses
‘Liter’
or
‘Gallon (US)’
as the
‘Unit’
.
8.7
Service (SERVICE menu)
The following can be carried out from this menu:
1 -
‘Clear counters’
2 - Set contrast (Menu
‘Display’
)
3 -
‘HMI logout’
4 - Set safety settings for operating menu (
‘Safety’
menu)
8.7.1
Clear counters (CLEAR COUNTERS menu)
Continuous
display
Main menu
Mode
Settings
Service
Information
Language
Service
Clear counters
Display
HMI logout
Security
End
Clear counters
All
Stroke counter
Quantity counter
In the
‘CLEAR COUNTERS’
menu, you can either delete the stored total
number of strokes (
‘Stroke counter’
) or the total litres (
‘Quantity counter’
)
(= reset to "0") or both together :
n
‘All’
n
‘Stroke counter’
(total number of strokes)
n
‘Quantity counter’
(total litres)
n
‘Memory’
(remaining strokes) (only with
‘Batch’
and
‘Contact’
)
To do this simply quit the menu by quickly pressing the key
[P/OK]
key.
The variables have increased since commissioning of the pump, the last
calibration or the last deletion.
Set-up
60
To Next Page
Loading...
Need help?
General
