ProMinent S1Cb - Design and Options

S1Cb Sigma 1, Control Type, Version b
Design
0
With ProMinent
®
Logo
1
without ProMinent
®
logo
F Physiological safety declaration
Electric power supply
U 1 ph, 100-230 V ± 10 %, 50/60 Hz
Cable and plug
A 2 m European
B 2 m Swiss
C 2 m Australian
D 2 m USA
Relay
0 No relay
1 Fault indicating relay (230V - 8A)
3 Fault indicating relay + pacing relay (24V
- 100mA)
8 0/4-20 mA analog output + fault indi‐
cating -/ pacing relay (24V - 100mA)
Control version
0 Manual + external contact with
pulse control
1 Manual + external contact with
pulse control + analog + dosing
profiles
5 as 1 + timer
6
as 1 + PROFIBUS
®
-DP interface
(M12 plug)
7 As 1 + CANopen **
Overload switch-off
0 without overload switch-off
1 with overload switch-off - 4
bar
2 with overload switch-off - 7
bar
3 with overload switch-off - 10
bar
Operating unit (HMI)
S HMI (0.5 m cable)
1 HMI + 2 m cable
2 HMI + 5 m cable
X without HMI
Safety options
0 Dosing monitor,
dynamic, without
access control
Identity code
7