Promise Technology Pegasus R4i User Manual

126
Promise Technology Pegasus R4i
6. Enter the email address used for the sender’s address in EmailSender(From)Address.
7. EntertheemailaddresstoreceivetheemailnoticationinReciever’s Email Address.
8. The default value in SMTP Server Port is 25, change this only if your company uses a different
port for SMTP.
9. EnterthesubjecttextusedforthenoticationemailsinEmail Subject.
10. Use the LeveldropdownmenuInLeveltoselecttheeventurgencylevelofthenotications
tobesent.Notethatyourchoiceofnoticationurgencyleveleffectshowfrequentlyanemail
noticationwillbesent.Forexample,ifyouchooseWarning, you will receive many emails which
are not urgent. It is recommended to use the Major leveltoalertofsignicanteventsthatmight
effect performance or device health so that Critical or Fatal events might be avoided.
11. Click Save to save the settings.
12. Itisrecommendedtorunatestofthesettingstomakesureyouareabletoreceivenotications.
Click Test Email to send test email to the receiver. If the test email is received, you do not need
to change any settings. If an email is not received, check the settings again to make sure they
werecorrectlytyped.AlsotrydisablingESMTPandtesttheemailnoticationssettingsagain.
To clear the settings entered in the menu, click the Clear button.

Promise Technology Pegasus R4i Specifications

General

Brand	Promise Technology
Model	Pegasus R4i
Category	Control Unit
Language	English