Promise Technology Pegasus R4i User Manual

100
Promise Technology Pegasus R4i
Drive Status LEDs
Activity LEDs
Formatting Your Logical Drives
If you left the Format box checked when you created your logical drives, they are formatted
automatically.
If you UNchecked the Format box, you must format your logical drives manually.
See “Formatting Your Logical Drives” on page 100.
WhenthePegasusUtilityhasnishedtheformatoperation,newremovable-drive
icons, each representing one logical drive, appear on your desktop.
When you see the icon, your logical drive is ready to use. Your logical drives are
ready to use.
Locating a Logical Drive
ThisfeaturecausesthedrivemoduleLEDstoashforoneminutetoassistyouinlocatingthephysical
drives that make up this logical drive.
To locate a logical drive:
1. Click the Storage tab.
2. Click the Logical Drive icon.
The list of logical drives appears.
3. Mouse-over the logical drive you want then click the Locate button.
The Drive Power / Status LEDs for the physical drives that make up the logical drive blink blue
and orange for one minute.
Running the Locate funcon to idenfy a disk array
Drive Power / Status LEDs blink blue and orange

Promise Technology Pegasus R4i Specifications

General

Brand	Promise Technology
Model	Pegasus R4i
Category	Control Unit
Language	English