Promise Technology Pegasus32 R6 - Page 120

104
Promise Technology Pegasus32 Series
Migration
The term “Migration” means either or both of the following:
• Change the RAID level of a logical drive.
• Expand the storage capacity of a logical drive.
See “Migrating a Logical Drive” on page 159.
!
WARNING
In USB mode, if Utility is NOT “executing”, when migration is completed, power
off the host system completely, then power on the host system again, i.e. run
a complete power cycle for the host system; do not simply restart the host
device.ThismustbedoneinordertoupdatethediskcongurationforOS.
!
WARNING
In USB mode, Pegasus32 will reboot when migration is completed.
Besuretorstdiscontinueanyaccessing(IOoperation)beforemigrating.