Promise Technology Pegasus32 R6 - Page 25

9
Installation and SetupPegasus32 Product Manual
Summary of the setup procedure
The setup procedure for the Pegasus32 is simple and easy. The device is shipped with hard disk
drivesinstalledandaRAIDarraycongured,soitisjustnecessarytoplugitinandconnectthedevice.
However,youshouldinstallthePegasusUtilitysoftwareusedformonitoringandadministrationofthe
system.Macusers,pleasefollowthesetupprocedurehereorintheQuickStartGuide.
The setup process is summarized below.
1. Unpack the Pegasus32 shipping package
2. Connect the power cord and power on the Pegasus32 R4/R6/R8.
3. Connect the Pegasus32 to your computer with a Thunderbolt™ 3 / USB cable.
4. Mac users can locate the Pegasus Utility installation package located on the device (Pegasus32
isshippedwithRAID5conguration)andinstallthemanagementsoftwareutility.Windows
users please skip ahead to “InstallationandSetupforWindowsUsers”onpage62.