245
File System ConversionPegasus32 Product Manual
2. After several seconds, the Dashboard menu appears. Use this menu later to view a summary of
the device status. First you need to format the le system for the Pegasus32.
3. Click on the Logical Drive menu icon near the top of the menu. Notice in the middle of the menu
a description of the RAID array that is already setup. The default setup is a RAID 5 using all the
hard disks. If you want to change this, please see the product manual. Otherwise, to begin using
the Pegasus32 right away, click on the Format button to begin the formatting procedure.
To Next Page
Loading...
