Promise Technology Vess A3340 - Page 188

177
Managing with CLIVess A3340 Product Manual
-p <PD ID> Species the ID of the replacement physical drive. The target drive of the
Rebuild.
Examples
rb
rb -a start -d0 -s2 -p10
rb -a stop -d0 -s2
sc
Usage
sc [-a <action>] [-i <SpareId>]
sc -a start [-i <SpareId>]
Summary
The sc command starts a Spare Check and monitors the status of a running Spare Check.
Options
-a <action> Species the action to perform.
list (Default) Displays Spare Check status.
start Starts the Spare Check.
-i <Spare ID> Species the spare ID on which to run Spare Check. Valid value range is
0~255.
Examples
sc
sc -a start -i 3