EasyManua.ls Logo

Protec Algo-Tec 6500 - Network Fault; Fire Link Fault; Fire Protection Fault

Protec Algo-Tec 6500
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RDM0001/3_2 Page 14 of 70 © 2015 - 2017 Protec Fire Detection plc
6.5 Network Fault
A fault has been detected on the network connecting the panels together.
6.6 Fire link Fault
A fault has been detected on the monitored fire link path. This may be a wiring fault or a fire
link interface fault. The connection to the fire station link is no longer reliable. Expert advice
should be sought immediately.
6.7 Fire Protection Fault
A fault has been detected on the monitored path to fire protection equipment. This may be a
wiring fault or a fire protection interface fault. The connection to the fire protection
equipment is no longer reliable. Expert advice should be sought immediately.

Table of Contents

Other manuals for Protec Algo-Tec 6500

Related product manuals